Como bloquear facebook y youtube en router cisco RV110W

[michrod79]

Por favor si alguien puedo ayudarme con información de como bloquear algunas paginas (https:); como facebook y/o youtube con el firewall de un router Cisco RV110W. Intente ingresando la URL del sitio y también el "keyword", pero lamentablemente no funciona.

actualice el Firmware a la versión 1.2.1.7 pero aun así no pude bloquear.

Gracias a todos de antemano.

[Enrique Ramirez]

Hola michrod79,

Encontre esta guia que espero te ayude a bloquear los FQDNs que mencionas.

Saludos,

Enrique Ramirez

Te dejo un resumen breve de lo que requieres hacer.

1. Choose Firewall > Internet Access Policy.

2. Click Add Row.

3. In the Status field, check Enable.

4. Enter a policy name for identification and management purposes.

From the Action drop-down menu, choose the type of access restriction you need:

• Always block—Always block Internet traffic. This blocks Internet traffic to and from all endpoints. If you want to block all traffic but allow certain endpoints to receive Internet traffic, see Step 7.

• Always allow—Always allow Internet traffic. You can refine this to block specified endpoints from Internet traffic; see Step 7. You can also allow all Internet traffic except for certain websites; see Step 8.

• Block by schedule—Blocks Internet traffic according to a schedule (for example, if you wanted to block Internet traffic during the weekday business hours, but allow it after hours and on weekends).

• Allow by schedule—Allows Internet traffic according to a schedule.
  If you chose Block by schedule or Allow by schedule, click Configure Schedules

  to create a schedule. See Managing Firewall Schedules.
  

• 6. Choose a schedule from the drop-down menu.

• 7. (Optional) Apply the access policy to specific PCs to allow or block traffic coming from specific devices:

1. In the Apply Access Policy to the Following PCs table, click Add Row.

2. FromtheTypedrop-downmenu,choosehowtoidentifythePC(byMAC

   address, by IP address, or by providing a range of IP addresses).

3. In the Value field, depending on what you chose in the previous step, enter the one of the following:

   • MAC address (xx:xx:xx:xx:xx:xx) of the PC to which the policy applies.

   • The IP address of the of the PC to which the policy applies.

   • The starting and ending IP addresses of the range of addresses to block (for example, 192.168.1.2-192.168.1.253).

   • 8.To block traffic from specific websites:

   1. In the Website Blocking table, click Add Row.

   2. FromtheTypedrop-downmenu,choosehowtoblockawebsite(by specifying the URL or by specifying a keyword that appears in the URL).

   3. In the Value field, enter the URL or keyword used to block the website.

For example, to block the example.com URL, choose URL Address from the drop-down menu and enter example.com in the Value field. To block a URL that has the keyword “example” in the URL, choose Keyword from the drop- down menu and enter example in the Value field.

9. Click Save.

http://www.cisco.com/c/dam/en/us/td/docs/routers/csbr/rv110w/administration/guide/rv110w_admin.pdf