cancelar
Mostrar resultados para 
Pesquisar em vez de 
Queria dizer: 
cancel
1413
Apresentações
10
Útil
2
Respostas

CISCO ASR1002 RECUPERAR SENHA ENABLE OU RESETAR

Oi time, 

Desde já, agradeço a atenção de todos(as). Estou enfrentando um caso delicado, estou lidando com uma caixa que não tem botão para reset físico e não sabemos a senha enable. Ao acessar o equipamento via porta serial, não é solicitado senha, porém, ficamos em modo view. Tentei diversas vezes o procedimento Special Command > Break no Putty durante todo o boot e sem sucesso. Abaixo deixarei todo o debug do equipamento durante o boot e seu display version. Alguém pode me da uma luz do que fazer ?

System Bootstrap, Version 16.3(2r), RELEASE SOFTWARE
Copyright (c) 1994-2016 by cisco Systems, Inc.


Current image running: Boot ROM0
Last reset cause: PowerOn
Last reset at: Thu Jun 03 04:52:39 UTC 2021


ASR1002-RP1 platform with 4194303 Kbytes of main memory

no valid BOOT image found
Final autoboot attempt from default boot device...
Warning: filesystem is not clean
Warning: filesystem is not clean
Located asr1000rp1-adventerprisek9.03.13.06a.S.154-3.S6a-ext.bin
Image size 370973308 inode num 11, bks cnt 90570 blk size 8*512
#######################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################
Boot image size = 370973308 (0x161c9a7c) bytes

Package header rev 0 structure detected
Calculating SHA-1 hash...done
validate_package: SHA-1 hash:
calculated 9a28ef1b:c8dbdbf6:2488681f:1301a998:cffee483
expected 9a28ef1b:c8dbdbf6:2488681f:1301a998:cffee483
Image validated
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 1 contained errors which were auto-corrected.
%IOSXEBOOT-4-BOOT_ACTIVITY_LONG_TIME: (rp/0): tdl_boot_time_resolve took: 116 seconds, expected max time 30 seconds

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

 

Cisco IOS Software, ASR1000 Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 15.4(3)S6a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Tue 27-Sep-16 22:08 by mcpre

 

Cisco IOS-XE software, Copyright (c) 2005-2016 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.

 

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco ASR1002 (2RU) processor (revision 2RU) with 1649871K/6147K bytes of memory.
Processor board ID FOX1610G1E6
4 Gigabit Ethernet interfaces
1 Ten Gigabit Ethernet interface
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
7757823K bytes of eUSB flash at bootflash:.

 

Press RETURN to get started!


*Jun 3 04:58:11.878: pak_debug_init: Successfully initialized pak debug trace buffer
*Jun 3 04:58:12.797: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Jun 3 04:58:13.749: %VOICE_HA-7-STATUS: CUBE HA-supported platform detected.
*Jun 3 04:58:17.595: %LINK-3-UPDOWN: Interface Lsmpi0, changed state to up
*Jun 3 04:58:17.596: %LINK-3-UPDOWN: Interface EOBC0, changed state to up
*Jun 3 04:58:17.596: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0, changed state to up
*Jun 3 04:58:17.597: %LINEPROTO-5-UPDOWN: Line protocol on Interface LI-Null0, changed state to up
*Jun 3 04:58:17.597: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to down
*Jun 3 04:58:17.619: %LINK-3-UPDOWN: Interface LIIN0, changed state to up
*Jun 3 04:58:17.852: %NETCLK-5-NETCLK_MODE_CHANGE: Network clock source not available. The network clock has changed to freerun

*Jun 3 04:58:18.470: %IOSXE_MGMTVRF-6-CREATE_SUCCESS_INFO: Management vrf Mgmt-intf created with ID 1, ipv4 table-id 0x1, ipv6 table-id 0x1E000001
*Jun 3 04:58:18.769: %LINEPROTO-5-UPDOWN: Line protocol on Interface Lsmpi0, changed state to up
*Jun 3 04:58:18.770: %LINEPROTO-5-UPDOWN: Line protocol on Interface EOBC0, changed state to up
*Jun 3 04:58:18.770: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Jun 3 04:58:18.771: %LINEPROTO-5-UPDOWN: Line protocol on Interface LIIN0, changed state to up
*Jun 3 04:58:22.928: %AAAA-4-SERVUNDEF: The server-group "RADIUS_Bital" is not defined. Please define it.
*Jun 3 04:58:22.952: %LINEPROTO-5-UPDOWN: Line protocol on Interface L2TP-Virtual1, changed state to up
*Jun 3 04:58:23.028: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up
*Jun 3 04:58:23.458: %SYS-5-CONFIG_I: Configured from memory by console
*Jun 3 04:58:23.479: %IOSXE_OIR-6-REMSPA: SPA removed from subslot 0/0, interfaces disabled
*Jun 3 04:58:23.480: %IOSXE_OIR-6-REMSPA: SPA removed from subslot 0/1, interfaces disabled
*Jun 3 04:58:23.489: %SPA_OIR-6-OFFLINECARD: SPA (4XGE-BUILT-IN) offline in subslot 0/0
*Jun 3 04:58:23.494: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2) offline in subslot 0/1
*Jun 3 04:58:23.502: %IOSXE_OIR-6-INSCARD: Card (fp) inserted in slot F0
*Jun 3 04:58:23.502: %IOSXE_OIR-6-ONLINECARD: Card (fp) online in slot F0
*Jun 3 04:58:23.562: %IOSXE_OIR-6-INSCARD: Card (cc) inserted in slot 0
*Jun 3 04:58:23.562: %IOSXE_OIR-6-ONLINECARD: Card (cc) online in slot 0
*Jun 3 04:58:23.639: %IOSXE_OIR-6-INSSPA: SPA inserted in subslot 0/0
*Jun 3 04:58:24.661: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2, changed state to up
*Jun 3 04:58:24.662: %LINK-3-UPDOWN: Interface Virtual-Access2, changed state to up
*Jun 3 04:58:25.325: %LINK-5-CHANGED: Interface GigabitEthernet0, changed state to administratively down
*Jun 3 04:58:27.104: %LINK-3-UPDOWN: Interface TenGigabitEthernet0/1/0, changed state to down
*Jun 3 04:58:27.565: %SPA_OIR-6-ONLINECARD: SPA (4XGE-BUILT-IN) online in subslot 0/0
*Jun 3 04:58:28.104: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet0/1/0, changed state to down
*Jun 3 04:58:28.635: %SPA_OIR-6-ONLINECARD: SPA (SPA-1X10GE-L-V2) online in subslot 0/1
*Jun 3 04:58:29.222: %IOSXE_SPA-6-UPDOWN: Interface TenGigabitEthernet0/1/0, link down due to remote fault
*Jun 3 04:58:31.450: %IOSXE_SPA-6-UPDOWN: Interface TenGigabitEthernet0/1/0, link down due to remote fault
*Jun 3 04:58:30.812: %LINK-3-UPDOWN: SIP0/1: Interface TenGigabitEthernet0/1/0, changed state to down
*Jun 3 04:58:33.653: %LINK-3-UPDOWN: Interface TenGigabitEthernet0/1/0, changed state to up
*Jun 3 04:58:32.871: %LINK-3-UPDOWN: SIP0/1: Interface TenGigabitEthernet0/1/0, changed state to up
*Jun 3 04:58:34.654: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet0/1/0, changed state to upCC

aut1.interlink>
aut1.interlink>enable

Password:
% Access denied

aut1.interlink>

 

aut1.interlink>show version
Cisco IOS XE Software, Version 03.13.06a.S - Extended Support Release
Cisco IOS Software, ASR1000 Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 15.4(3)S6a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Tue 27-Sep-16 22:08 by mcpre


Cisco IOS-XE software, Copyright (c) 2005-2016 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.


ROM: IOS-XE ROMMON

aut1.interlink uptime is 1 minute
Uptime for this control processor is 5 minutes
System returned to ROM by reload
System image file is "bootflash:/asr1000rp1-adventerprisek9.03.13.06a.S.154-3.S6a-ext"
Last reload reason: PowerOn

 

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco ASR1002 (2RU) processor (revision 2RU) with 1649871K/6147K bytes of memory.
Processor board ID FOX1610G1E6
4 Gigabit Ethernet interfaces
1 Ten Gigabit Ethernet interface
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
7757823K bytes of eUSB flash at bootflash:.

Configuration register is 0x2102






1 Soluções Aceita

Soluções aceites

Jonas Fraga
Spotlight
Spotlight

Olá @Vinícius Araújo 

Quando o Break está desabilitado no Router, somente nos primeiros 60 segundos de boot a funcionalidade está disponível.

Tente desligar o equipamento, aguardar uns 30 segundos, ligar novamente e enviar o comando durante o boot (Antes de 60 segundos). Caso não funcione tente os atalhos CTRL + Break ou CTRL + SHIFT + 6 + X

Uma última alternativa pode ser olhar este post do @tobyarnett :https://community.cisco.com/t5/vpn/how-do-you-send-a-quot-break-quot-on-putty-to-a-cisco-2600/td-p/1857874/page/2

 

Com isso você entra em Rommon e pode fazer a alteração de registro para recuperação das senhas.

Ver solução na publicação original

2 RESPOSTAS 2

Jonas Fraga
Spotlight
Spotlight

Olá @Vinícius Araújo 

Quando o Break está desabilitado no Router, somente nos primeiros 60 segundos de boot a funcionalidade está disponível.

Tente desligar o equipamento, aguardar uns 30 segundos, ligar novamente e enviar o comando durante o boot (Antes de 60 segundos). Caso não funcione tente os atalhos CTRL + Break ou CTRL + SHIFT + 6 + X

Uma última alternativa pode ser olhar este post do @tobyarnett :https://community.cisco.com/t5/vpn/how-do-you-send-a-quot-break-quot-on-putty-to-a-cisco-2600/td-p/1857874/page/2

 

Com isso você entra em Rommon e pode fazer a alteração de registro para recuperação das senhas.

FGOSILVA
Spotlight
Spotlight

Boa noite,

 

Siga conforme descrito na doc abaixo:

https://www.cisco.com/c/en/us/td/docs/routers/asr1000/install/guide/asr1routers/asr-1000-series-hig/asr-hig-tbl.pdf

 

Procure a sessão "Replacing or Recovering a LostPassword" tem o passo a passo de como ser feito.

 

Att,

Primeiros Passos

Encontre respostas, faça perguntas e conecte-se com nossa comunidade de especialistas da Cisco de todo o mundo.

Estamos felizes por você estar aqui! Participe de conversas e conecte-se com sua comunidade.