Hello,
I want to make a BGP infra with RPKI here is the infra.
The router C1_B can ping the 213.111.0.2 but not the 192.168.2.1.
Here is the bgp conf of router c1_B :
router bgp 40001
bgp log-neighbor-changes
bgp rpki server tcp 192.168.102.39 port 3323 refresh 600
neighbor 192.168.1.1 remote-as 40001
neighbor 192.168.102.39 remote-as 40001
neighbor 213.111.0.2 remote-as 40002
neighbor 213.111.0.2 update-source GigabitEthernet0/0
!
address-family ipv4
network 192.168.1.0
network 213.111.0.0
neighbor 192.168.1.1 activate
neighbor 192.168.1.1 route-map rtmp-rpki in
neighbor 192.168.102.39 activate
neighbor 192.168.102.39 route-map rtmp-rpki in
neighbor 213.111.0.2 activate
exit-address-family
C2_B BGP Router Config:
router bgp 40002
bgp log-neighbor-changes
network 192.168.2.0
network 213.111.0.0
neighbor 192.168.2.2 remote-as 40002
neighbor 213.111.0.1 remote-as 40001
neighbor 213.111.0.1 update-source GigabitEthernet0/1
Thank you in advance
