Switch WS-C3650-48TS

[dtg-exploit-srv]

Bonjour,

Pouvez vous me fournir là commande exact afin d'activer interface Web ?

En sachant que l'interface actuellement n'est pas active

Merci

[balaji.bandi · Accepted solution]

make sure the device has right image (not bin file, it required tar file for the full gui to work)

SUMMARY STEPS

1.    enable

2.    configure terminal

3.    ip http server

4.    ip http authentication {aaa | enable | local | tacacs}

5.    ip http accounting commands level {default | named-accounting-method-list}

6.    ip http port port-number

Note : make sure local user created -

username cisco privilege 15 password cisco123