Segue abaixo procedimento para recuperação de senha do Nexus 1010
1. Acesso o VSB através da gerência do Nexus 1010Login to VSB from Nexus 1010.
2. Quando o VSM estiver efetuando a inicialização (se já estiver iniciado, reinicie). Durante a inicialização, quando aparecer a mensagem "Loading image", aperte as teclas "control+]". Esta sequencia fará com que seja exibido o prompt para alteração de senha.
3. Após definir a senha, execute o comando "load <imagem>"
4. Após a inicialização, efetue o acesso com a nova senha.
# Exemplo
n1010-1# login virtual-service-blade SV14
Telnet escape character is '^\'.
Trying 127.1.0.18...
Connected to 127.1.0.18.
Escape character is '^\'.
Loading system software
INIT: Switching to runlevel: 1
INIT: Sending processes the TERM signal
Stopping dhcpd daemon: dhcpd.
Unexporting directories for NFS kernel daemon...done.
ctrl+]
switch(boot)# conf terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(boot)(config)# admin-password Cisco12345
switch(boot)(config)# exit
switch(boot)# dir bootflash:
455 Mar 21 2011 07:31:59 N1KVFEAT20110318193209567.lic
77824 Sep 17 2011 22:45:10 accounting.log
4096 Dec 15 2010 09:23:58 core/
4096 Dec 15 2010 09:24:34 eem_logs/
4096 Sep 11 2011 13:30:26 log/
16384 Dec 15 2010 09:23:42 lost+found/
20419072 Dec 15 2010 09:23:45 nexus-1000v-kickstart-mz.4.0.4.SV1.3b.bin
90513280 Dec 15 2010 09:23:58 nexus-1000v-mz.4.0.4.SV1.3b.bin
4096 Dec 15 2010 09:24:24 vdc_2/
4096 Dec 15 2010 09:24:24 vdc_3/
4096 Dec 15 2010 09:24:24 vdc_4/
Usage for bootflash: filesystem
144887808 bytes total used
2129879040 bytes free
2147483647 bytes available
switch(boot)# load nexus-1000v-mz.4.0.4.SV1.3b.bin