cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2252
Views
0
Helpful
2
Replies

Can not ping/connect to our ESA from remote network

alok59374
Level 1
Level 1

Hello,

I just joined a small company and I am familiarizing with the Ironport ESA appliance (C100V).

 

I can't figure out why can't our branch office (LAN2LAN) access to the ESA like we do in main office ? 

 

I went through all our network settings (router, switches, acl, nat, routes ...) everything is fine : branch office can communicate with every hosts in the same LAN than the ESA except the esa himself.

Tried to create a new LAN on the main office router to see if it could ping the ESA and it could not (again, ACL etc. are fine)

 

So naturally I concluded it was a software setting that I can't seem to find neither on ESA web interface or through SSH commands...  Is there some sort of firewall on the asyncos or any other rule ?

 

=>  In Sys administration > network access > User Access: I have Allow Any Connection

=> I successfully ping branch office LAN from the ESA (with SSH)

 

Thank you

 

1 Accepted Solution

Accepted Solutions

marc.luescherFRE
Spotlight
Spotlight