cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3376
Views
5
Helpful
3
Replies

Cisco IronPort AsyncOS 7.1.5-017 for Email General Availability Release Notification

Alvaro J Gordon-Escobar
Cisco Employee
Cisco Employee

Dear Cisco IronPort Customer,

Cisco is pleased to announce general availability (GA) of AsyncOS release 7.1.5-017 for Email Security Appliances. This release applies to all our Email Security Appliances (C- and X-Series).

Partial list of defects fixed in AsyncOS 7.1.5-017 for Email

Fixed: The Packet capture feature in AsyncOS now supports NIC pairing and VLAN [Defect ID: 31279]
Fixed: Under certain circumstances, LDAP Masquerade Query Cannot Process To: Headers that do not Conform to RFC 204 [Defect ID: 51946]
Fixed: Apply memory check while archiving large unscannable message [Defect ID: 72606]
Fixed: Under certain circumstances, some Postfix versions had potential impact on STARTTLS connections in Email security appliances [Defect ID: 76792]
Fixed: Apply memory check to ensure reporting operation executed without an error [Defect ID: 76664]
Fixed: Under certain circumstance, message filter did not modify some headers [Defect ID: 70598]
Fixed: Under certain circumstances, End user quarantine used default demo certificate for LDAP connections [Defect ID: 75798]
For further information about this release, please refer to the AsyncOS Release Notes. The release notes are available on Cisco.com at the following URL:

http://www.cisco.com/web/ironport/index.html

If you are concerned about an issue not listed here, please contact your authorized support provider to make an inquiry.

How to Upgrade

Prior to upgrading to these releases, please read the Release Notes referenced above and save a copy of the configuration file somewhere other than on your appliance.

Once you have read the Release Notes you may log into the command line of your IronPort Appliance as the 'admin' user, and type 'upgrade', or use the WebUI upgrade functionality in the 'System Administration' tab.
You may upgrade directly to the highest version available in the displayed list.

**NOTE** It is important that you follow the upgrade instructions available in the Release Notes. If you do attempt to upgrade and do not see the desired release version available, your appliance is likely not on a version allowed to upgrade directly. See 'Upgrade Paths' below.

Upgrade Paths

Please refer to the Release Notes for qualified upgrade paths.
If your systems are on any other AsyncOS release, you will need to perform multiple upgrades as specified in the release notes. Only the immediate next step in the upgrade path will be shown to you, with the next revision being shown once you are at the approved level.

Release Stage

General Availability (GA): This release has been fully qualified for production usage by Cisco for the IronPort ESA platform. It has been extensively tested for functionality and stability. We offer all customers the chance to benefit from the new features and enhancements in this release.

Thank you for choosing Cisco IronPort Security Products.

Best Regards,
Cisco Customer Support
Support Portal: http://cisco.com/web/ironport
Toll-Free Customer Support
United States: 1-877-641-IRON (4766)
International: http://www.cisco.com/web/ironport/contact


NOTICE: CISCO SYSTEMS CONFIDENTIAL AND PROPRIETARY This document contains information which is both confidential and proprietary to Cisco. Neither this document nor the information contained herein shall be copied, disclosed to others or used for any purposes beyond the specific purpose for which this document was delivered without the express written permission of Cisco. If you receive this message in error, please notify the sender and destroy the attached message (and all attached documents) immediately.

3 Replies 3

ninoroygaleos
Level 1
Level 1

I saw from the attachment, bunch of fixes were fixed from 7.1.3 version. So, hope 7.1.5 is now a stable version.

Hello Ninoroyagleos,

7.1.5-017 is now replaced by 7.1.5-101.  The  newest version of AsyncOS avaliable to all customers is 7.5.1-102.   I would strongly recommend upgrading to 7.5.1 instead.  This build offers all the fixes 7.1.5 had and more.  7.5.1 has been GA since Dec of 2011.  7.5.1-102 was released  on Feb 15, and it is in used by 30% of our install base. 

Regards,

-Alvaro

...nice that's good to know the AsyncOS latest version.

thanks