Easy way to export Ironport settings on Prod box and import

[mgraci_ironport]

We have a production C30 box that handles all of our Inbound/Outbound mail.

We have also purchased a C10 that will eventually work in an Ironport cluster with the C30.

However, I currently have the need to migrate the C30 from our existing DMZ to a new DMZ. It has been decided that the best way to do this is to setup the C10 in the new DMZ and set it up with the same settings as the C30 (with the IPs being different). This would allow both boxes to receive inbound mail for the production domain while the new DNS MX record propogates throughout the Internet.

The question is, is there an easy way to export the C30 settings and import them into the C10 so that I do not need to go page by page to copy the settings?

Thanks,
-Matt

[shannon.hagan]

On old server:
saveconfig

ftp or scp the file from the old server

edit file to change ip addresses

ftp or scp the file to the new server

On new server:
loadconfig

[tminchin_ironport]

Might have to do it in sections as the C10 and the C30 have different interface layouts

[mgraci_ironport]

I tried to do the export/import.

However I keep getting:
Invalid data format.
The certificate and key do not match.
Value was: ('*****', '*****')
Parsing failed. Aborting.

So I opened a support case.

-Matt