ISE TACACS Command Sets for shut / no shut

[WonderBoy1990]

Hi,

It is possible in ISE to allow a particular group to enter configuration mode but can only do the shutdown and no shutdown? What could be the possible argument for such.

Thanks!

[Francesco Molino · Accepted solution]

Hi

You can create 2 command set that you will assign based on a AD group.

In the specific command set, you will allow conf t, interface command and shut/no shut.

Is that clear? I could try to do some screenshots with existing ise if needed.

[WonderBoy1990]

Hi,

This is great! Thank you!