11-16-2018 07:35 AM - edited 02-21-2020 08:28 AM
It says the SNMP v3 connection passes, but I'm not getting any interface, cpu, memory stats.
Does anybody have this working?
11-16-2018 09:10 AM - edited 11-16-2018 09:12 AM
Hi,
I think you can add FTD in Solarwinds and you can get the details of CPU, Memory & Interface Below link shares the MIB values
https://thwack.solarwinds.com/docs/DOC-190820#comment-276033
HTH
Abheesh
10-29-2019 11:18 AM
Hi,
I can't get the active connections though.
Thanks much,
Cheryl
10-29-2019 09:05 PM
Are you querying the FTD management address (won't give you full functionality) or have you setup the diagnostic interface address so that you can query the Lina susbystem directly (recommended approach)?
11-04-2019 12:53 AM
11-04-2019 03:46 AM
@NeWGuy1109 wrote:
..does inside interface as an snmp provider works ?
No it doesn't work to provide full functionality.
You need to setup the diagnostic interface address so that you can query the Lina subsystem directly.
11-08-2019 02:29 AM
Does the address on the diagnostic interface need to be of same subnet as that of inside or it needs to be a distinguished IP in the network ? Solarwinds will then Poll diagnostic interface IP for SNMP ?
Thanks
11-08-2019 02:50 AM
The diagnostic interface shares the physical management interface. They must both have addresses in the same subnet, usually not the same as the inside interface.
Once you have it configured and verified reachable, SolarWinds NPM or any other SNMP management system can query it via the configured SNMPv3 username and password.
11-08-2019 06:54 AM
Thanks for the reply.. i configured diagnostic interface with one of the IPs in the management subnet ..but i am unable to ping diagnostic interface from any of the Ips in the management network... am i missing something ?
10-29-2019 09:28 PM
What Marvin said: Setup the diagnostic interface and that should give you the information that you are looking for.
Thank you for rating helpful posts!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide