cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

144
Views
0
Helpful
3
Replies
Beginner

Cisco FPR 2110 ASA Interface Not coming up

Hi,


We have converted Cisco FPR 2110 to ASA 9.12.2

 

we have got only two ports only working and remaining ports are not working.

 

Eth1/1 and Eth1/2 and other Eth1/3-9 are not coming up only regardless its showing not admin down.

 

Thanks,

 

Everyone's tags (1)
3 REPLIES 3
VIP Advisor RJI VIP Advisor
VIP Advisor

Re: Cisco FPR 2110 ASA Interface Not coming up

Hi,

The interface must be physically enabled in FXOS and also logically enabled in ASA. Reference here.

HTH

Beginner

Re: Cisco FPR 2110 ASA Interface Not coming up

hi,

thanks for that.. yeah i was able to resolve this issue.

 

Also, is there any way to enable USB detection in the asa mode as i need to copy images but through FTP its really slow for idk what reason.

 

Any suggestion

Highlighted
Hall of Fame Guru

Re: Cisco FPR 2110 ASA Interface Not coming up

The USB port isn't supported as a disk when running Firepower appliance with ASA image.

Check your speed and duplex if ftp is too slow. I've found Firepower appliances to be blazingly fast for local file transfers - running either ASA or FTD.