Cisco FPR 2110 ASA Interface Not coming up

[saxenanitesh8522]

Hi,

We have converted Cisco FPR 2110 to ASA 9.12.2

we have got only two ports only working and remaining ports are not working.

Eth1/1 and Eth1/2 and other Eth1/3-9 are not coming up only regardless its showing not admin down.

Thanks,

[Rob Ingram]

Hi,

The interface must be physically enabled in FXOS and also logically enabled in ASA. Reference here.

HTH

[saxenanitesh8522]

hi,

thanks for that.. yeah i was able to resolve this issue.

Also, is there any way to enable USB detection in the asa mode as i need to copy images but through FTP its really slow for idk what reason.

Any suggestion

[Marvin Rhoads]

The USB port isn't supported as a disk when running Firepower appliance with ASA image.

Check your speed and duplex if ftp is too slow. I've found Firepower appliances to be blazingly fast for local file transfers - running either ASA or FTD.