Failed DIMM on FMC 4000 appliance

[crawfordpat@aafes.com]

I have a tac case opened with the following description;

"Failed DIMM on FMC 4000 appliance. amber light was blinking on front of FMC4000. We checked the CIMC and saw the failure status of the memory in DIMM 5. We attempted to reseat the memory card, but the same error came back."

I have received the new DIMM to replace DIMM 5, can some one tell me which slot this is? The documentation does not specify this, or maybe, i just cant find it. I appreciate your help.

[Marvin Rhoads]

I couldn't find that in any of the published documentation either. Oddly the hardware installation guide shows all of the other models' DIMM layout EXCEPT the FMC4000.

https://www.cisco.com/c/en/us/td/docs/security/firepower/hw/maintenance/firepower-management-center/management_center/memory_upgrade.html#96411

I'd suggest asking your TAC engineer - they should have internal documents specifying the DIMM layout.