Fire power management center compatibility SFR module

[Salman.Baig]

i  am installation  Fire power management center 6.3.0 83

which sfr module compatibility for and which boot image 

please help.

asa version is 9.10

[Abheesh Kumar]

Hi, You can install 6.3. Which ASA model you have...???

[Salman.Baig]

@Abheesh Kumar i just only installe fmc on vmware   i want to install asasfr module which version of the asasfr module 

[Marvin Rhoads]

If your asasfr module is on ASA 5506-x or ASA 5512-X, you cannot run anything past 6.2.x. So you would image to 6.2.0 boot image and then install the associated package. Finally, patch the module to the lastest (6.2.3.9 as of this posting).

For all other models you can boot 6.3.0 img and install 6.3.0 pkg files.

[Salman.Baig]

@Marvin Rhoads i have asa 5525-x i install fmc version is 6.3.0 on esxi  virtual  and i need to now which is the compatible version of cisco sfr module on asa still asa version is 9.9.

[Marvin Rhoads]

As I noted, "For all other models you can boot 6.3.0 img and install 6.3.0 pkg files."

You can find those files here: 

https://software.cisco.com/download/home/286271172/type/286277393/release/6.3.0

Use "asasfr-5500x-boot-6.3.0-3.img" as the boot image and "asasfr-sys-6.3.0-83.pkg" as the module install package.

Detailed instructions on how to do so can be found here:

https://www.cisco.com/c/en/us/support/docs/security/asa-firepower-services/118644-configure-firepower-00.html