fmc 6.1 range of IP Address

[Ahmed Ismail]

Plz Can I have the right syntaxe of how to add a range of IP Address (Exemple:from 192.168.0.2 to 192.168.0.120 /24) when we will add a new network object in FirePower Management center version 6.1

[Jetsy Mathew]

Hello Ahmed,

You can add the ip range as follows :-

Format: ipaddr or ipaddr/len or

range (ipaddr-ipaddr) = (192.168.0.2-192.168.0.120)

Rate and mark correct  if the post helps you

Regards

Jetsy 

[asstec2]

Hi Jesty,

I do not understand the exact syntax to create a Range of IP addess.

range (ipaddr-ipaddr) = (192.168.0.2-192.168.0.120) 
range (192.168.0.2-192.168.0.120)
range = (192.168.0.2-192.168.0.120)
(192.168.0.2-192.168.0.120)

Regards,

Eric.