SNMP Configuration on 5506X FTD

[mohammed.mudassiruddin]

using FDM to configure the FTD, dont see any option where i can configure SNMP. do i need to use Flexconfig to configure snmp. I'm using data interface to manage the device. Management interface not in use.

[johnlloyd_13 · Accepted solution]

hi,

there's no SNMP setting/option in FDM under device or system setting.

you can do it via its flexconfig. see helpful link:

https://www.cisco.com/c/en/us/td/docs/security/firepower/623/fdm/fptd-fdm-config-guide-623/fptd-fdm-advanced.html#task_36ECF548DADB4200A448CC163B03ADB0

[mohammed.mudassiruddin]

that worked, thanks very much