Hello everybody,
I have a FS3500 (v4.10) with the System Error LED (exclamation triangle) and 1 hard drive LED in amber light.
The System Error LED in amber could mean RAID Controller and/or Raid Battery and/or Hard Drive issues, however having both System and the hard drive LEDs in amber makes me believe the problem is indeed with the hard drive.
Since I do not have experience with the 4.10 version, I would kindly ask you to assist me with any kind of commands/logs that could help me confirm if it is controller, battery, disk or software problem.
"sf_disk_status.pl" is not present.
"MegaCLI" is not recognized as a command.
"ipmitool chassis status | grep -i drive" returns the following output:
Drive Fault : false
"ipmitool sel list | grep "error|fault" returns the following output:
f | 02/25/2011 | 09:26:27 | System Firmware Error #0x06 | Unknown Error | Asserted
The action plan is to perform a cold boot of the device and if that does not help - re-image and finally raising a Cisco TAC case for RMA, however it would be really useful if I can gather additional information of whether or not it is hardware or software issue. If a hardware problem is confirmed, a re-image would not be necessary(a re-image would be greatly complicated due to the nature of configuration, etc. Master DC 3500 with 3 registered virtual DC's to it and each virtual DC has its own sensors, all belonging to different customers with whom a maintenance window has to be scheduled).
Thank you!