It doesn't wipe the SSD - just the bits in the ASA running-config as noted:
No support in 9.10(1) for the ASA FirePOWER module on the ASA 5506-X series and the ASA 5512-X—The ASA 5506-X series and 5512-X no longer support the ASA FirePOWER module in 9.10(1) and later due to memory constraints. You must remain on 9.9(x) or lower to continue using this module. Other module types are still supported. If you upgrade to 9.10(1), the ASA configuration to send traffic to the FirePOWER module will be erased; make sure to back up your configuration before you upgrade. The FirePOWER image and its configuration remains intact on the SSD. If you want to downgrade, you can copy the ASA configuration from the backup to restore functionality.
Threat Response Basics
What is Threat Response and how can it help my organization?
What is the cost of Threat Response?
What are the deployment options for Threat Response?
Is Threat Response available outside of the United States?
Gartner has once again named Cisco a Leader in the Magic Quadrant for Network Firewalls. This distinction recognizes Cisco's ingenuity in redefining the firewall as the basis for an integrated security platform.
Find out how Cisco stands out from the comp...
Hi experts,I would like any suggestions on this topology. We are is the middle of replacing our old ASA5520 with the new FirePower. Our current firewall terminate our IPsec tunnels and the GRE is terminated on the first inside router's loopback on the sec...
Hi All, A customer wants to authenticate Anyconnect VPN users from an ASA using the client installed certificate and then with AD. i.e. Is this a corporate device?Would we recommend authenticating the cert on the ASA then passing the AD check to ISE ...
Hello Team, we are getting alert in FMC stating policy deployment failed, we are running on 6.2.0 version and not sure which version is stable version to re mediate this issue, in one event i have seen restart will resolve this issue but is it perman...