cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
569
Views
5
Helpful
2
Replies

1Cisco ASA 1 3900 Router and 2 Internet connctions

jthombs1016
Level 1
Level 1

Hi all 

I have1Cisco ASA 5525x, 1 3900 Router and 2 Internet connections. what is the best deployment method to supported what I have.

 

1. Should both Internet connections connect to Firewall Interfaces ?

2. Should  Both Internet connections connect to the Internet router ?

Any advice will be much appreciated.  

1 Accepted Solution

Accepted Solutions

Dennis Mink
VIP Alumni
VIP Alumni

Connect your router to the outside of your ASA and your 3900 to your 2 ISP's. You will  most likely need to use BGP to make a preference between providers. you can use BGP local preference to do this.

Please remember to rate useful posts, by clicking on the stars below.

View solution in original post

2 Replies 2

Dennis Mink
VIP Alumni
VIP Alumni

Connect your router to the outside of your ASA and your 3900 to your 2 ISP's. You will  most likely need to use BGP to make a preference between providers. you can use BGP local preference to do this.

Please remember to rate useful posts, by clicking on the stars below.

salman abid
Level 1
Level 1

Hi,

What you wana achieve? active/active internet connections or active/standby.
If your ASA is running with 9.4 or later software version the you can directly terminate both of internet connections on ASA........... bcz cisco ASA can support PBR after release of 9.4 software version

 

 

 

 

Please remember to select a correct answer and rate helpful posts

Review Cisco Networking products for a $25 gift card