8.2 -> 8.4 Question

[Brendan Wood]

Hello,

I'm sure this will be a very easy question for most of you to answer.   I have to implement NAT rules but I'm given the rules in the old format.  I would like to translate the rule format into a 8.4 compatible ASA format.  I believe this is a network object?  Forgive me I don't have format training on ios.

The command for example would be :

static (dmz,outside) udp interface ntp 192.168.240.240 ntp netmask 255.255.255.255

Thanks in advance for your help.

[Vibhor Amrodia]

Hi,

The above example can be converted in ASA 8.3+ as:-

object network obj-192.168.240.240

host 192.168.240.240

nat (inside,outside) static interface service udp ntp ntp

Also , create the ACL on the outside interface and remember to change the destination PI address to the private IP.

Refer:-

http://www.cisco.com/c/en/us/td/docs/security/asa/asa83/upgrading/migrating.html

Thanks and Regards,

Vibhor Amrodia