Access problem from Inside to DMZ and outside to DMZ
So long time lurker, first time poster. These FTD firewalls are making me feel like a greenhorn again. I've slogged through the initial configuration, have interfaces and etherchannels finally working... but cannot for the life of me configure access from our inside networks to our DMZ. I configured NATs in the vein of our configuration on the older ASA5525s without success.
Re: Access problem from Inside to DMZ and outside to DMZ
The Access-rules should be similar to what you have on the ASA version 8.3+. You do not need a NAT to go from inside to DMZ. You can however add a NAT exempt to exempt inside to DMZ traffic from any translation.
DMZ to outside would require an Auto NAT rule. Also, an ACL would be needed from Outside to DMZ to allow internet users to access your public DMZ servers.
It would be good if you can show us an example of what you have configured and what is not working.
ProblemTaking a snapshot of ISE virtual machines is not supported but it still happens occasionally due to administrators taking a snapshot manually or an integrated technology that automatically takes snapshots to back up VMs. When taking a snapsho...
Hi all, Is it available on Stealthwatch 7 Client or web interface the ability to import the Netflow Exporters names? I found only the possibility to configure manually the name of each Netflow Exporter, but not a bulk configuration.
User Experience Enhancements
As part of Cisco Customer Experience program, we are working towards a more uniform user experience and terminology harmonization. This program runs across all Cisco security products.
We are ali...
Join us on Thursday, October 10 at 10 am PT to meet the CEO and Founder of Cisco's most recent security investment.
In today’s cybersecurity arms race, how does Cisco stay one step ahead in the battle against attackers? One key strategy is keeping tabs on...