Hello,
I have an ASA 5505 working between a router and a LAN.
The router have all ports redirected to the ASA.
What I need now is to be able to access to the port 80 of the router from the WAN.
I could redirect all ports to the ASA except the 80, but I cannot access to that router to change the config.
Is there any way to redirect back the connection to the router if I try to access the port 80 of the public IP?
I tried creating a static NAT rule to translate 10.1.1.1 from outside to outside in port 80, but it seems it doesn't work.
I also allowed the traffic from any to outside-network in port 80, but nothing.
The only actions logged are:
Source IP Source Port Destination IP Destination Port Description
7.7.7.7 49679 10.1.1.1 80 Built inbound TCP connection 10341324 for outside:7.7.7.7/49679 (7.7.7.7/49679) to outside:10.1.1.1/80 (10.1.1.2/80)
7.7.7.7 49679 10.1.1.1 80 Teardown TCP connection 10341324 for outside:7.7.7.7/49679 to outside:10.1.1.1/80 duration 0:00:09 bytes 0 TCP Reset-O
If someone could guide me through the rules I have to create it wold be nice
