cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to Cisco Firewalls Community


1589
Views
0
Helpful
19
Replies
Contributor

Re: Allow ICMP with PAT

Yes, I did all 5 lines.  When I enter "nat (inside,primaryisp) static 96.249.40.10 service " I can only choose TCP or UDP.

Highlighted
Contributor

Re: Allow ICMP with PAT

I already have some NAT configured but I also need to get ICMP responses on all the IPs.

Sent from Cisco Technical Support iPhone App

Cisco Employee

Re: Allow ICMP with PAT

Do you need to configure static PAT, or static NAT is OK?

From version 8.3 onwards, it seems that you won't be able to ping the static PAT IP anymore.

Contributor

Re: Allow ICMP with PAT

Yes, I need to do it using PAT.

Sent from Cisco Technical Support iPhone App

Contributor

Re: Allow ICMP with PAT

Still haven't been able to figure this out. Anyone else have any ideas??

Sent from Cisco Technical Support iPad App