ASA 5505 Routing

[josh_ray]

Here is the scenerio.  I have a client who is sharing internet with another party who is in the same building as they are through my clients ASA 5505.  I have configured Port 1 and 7 to "switchport access vlan2".  There is a sonic firewall that I do not manage that is programmed with one of my public IP and that is working just fine.  The problem lies where this other party wants to access a printer that is plugged in behind my ASA on vlan1.  I have tried differnt access list to allow this to work but I can not figure out this routing issue.  If anyone has a idea on how this would be configured please let me know thank you. 

[shamax_1983]

Hello Joshua,

Make sure you have same-security-traffic permit inter-interface turned on and

IF you have NAT exempts already configured for any of the interfaces, you might wanna add a new line with the two hosts interested

Please rate this post if helpful

Thanks

Shamal