10-18-2017 04:47 AM - edited 02-21-2020 06:31 AM
Hi,
I have few public IP address e.g. xx.xx.xx.210, xx.xx.xx.211 and i dont know how to create NAT 1:1
I would like to create connection from public IP address xx.xx.xx.211 to local address 192.168.100.200,
from xx.xx.xx.212 to 192.168.100.100
10-18-2017 05:10 AM - edited 10-18-2017 05:12 AM
Option 1:
I would recommend that you create a object for the inside host (192.168.70.100) and i object for the outside address (xx.xx.xx.212) that you want to use.
When this is done you can choose to edit the inside object you created and click to make a "Automatic Address Translation Rule". As translated rule you insert the name of the outside object you created.
Option 2:
Under configuration in ASDM you also find "Public Servers". Here you can also use the objects you created under option 1.
In booth options you can also edit the ports both on the inside and outside object. Also remember to create ACL rules when trying to access the host from the internett.
10-19-2017 03:24 AM - edited 10-19-2017 03:25 AM
I think that i have problem with ACL rules.
I created two objects:
outside: Camera1, host, IP address xx.xx.xx.212
inside: Camera_1, host, IP address xx.xx.xx.100
My ACL rules in and out:
10-27-2017 12:17 AM
any suggestions?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide