05-12-2016 07:48 AM - edited 03-12-2019 12:44 AM
Hi,
I had an issue in which the running config on my Cisco ASA 5510 suddenly became blank as if it has been restored to the default configuration however I havent made any changes to it recently.
When I checked the saved config all of my settings were there so I copied it over to the running config however a few hours later the same issue occured.
Any ideas on what might have caused this or how to permantly fix it would be great.
Thanks
Alex
05-12-2016 09:51 AM
Hi Alex,
Share the output of show memory and fsck flash.
Regards,
Aditya
Please rate helpful posts and mark correct answers.
05-12-2016 09:54 AM
asa(config)# show memory
Free memory: 127190128 bytes (47%)
Used memory: 141245328 bytes (53%)
------------- ----------------
Total memory: 268435456 bytes (100%)
asa(config)# fsck flash
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
/dev/hda1: 52 files, 5099/31180 clusters
fsck of flash: complete
05-12-2016 10:17 AM
Hi,
When you do a write memory do you see any error message or
Flash health seems fine apart from that I am not sure what else can lead to this.
Regards,
Aditya
Please rate helpful posts and mark correct answers.
05-12-2016 10:57 AM
When I run the write memory command it runs without any issues and I havent seen anything weird in the log files.
Thank you for your help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide