cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1358
Views
0
Helpful
0
Replies

ASA 5516 overheating?

db1
Level 1
Level 1

Hi All,

I just installed a secondary firewall in act/standby setup and noticed that it seems to be overheating.

See the output of show env command below. It seems that the CPU is at 75* but the Chassis fan is just at 2600rpm. And this is on a firewall that just sits there in standby, 0% cpu usage.

 

On my other firewalls (that are actually doing stuff) the chassis fan is at ~4000rpm with 30* cpu temperature.

 

 

 

Cooling Fans:
-----------------------------------

   Chassis Fans:
   --------------------------------
   Chassis Fan: 2640 RPM - OK

Temperature:
-----------------------------------

   Processors:
   --------------------------------
   Processor 1: 75.0 C - Critical  (CPU Core Temperature)

   Accelerators:
   --------------------------------
   Accelerator 1: 40.0 C - OK  (Accelerator Temperature)

   Chassis:
   --------------------------------
   Ambient 1: 40.0 C - OK  (Chassis Temperature)

   Motherboard:
   --------------------------------
   Ambient: 40.0 C - OK  (Chassis Temperature)

Voltage:
-----------------------------------
   Channel 1: 12.364 V - OK  (12V)
   Channel 2: 5.000 V - OK  (5V)
   Channel 3: 1.351 V - OK  (1.35V_CPU)
   Channel 4: 0.982 V - OK  (1.0V_VCC)
   Channel 5: 1.017 V - OK  (1.0V_VNN)
   Channel 6: 1.802 V - OK  (1.8V_CPU)
   Channel 7: 1.071 V - OK  (1.07V_CPU)
   Channel 8: 0.849 V - OK  (0.85V)
   Channel 9: 3.344 V - OK  (3.3V)
   Channel 10: 2.531 V - OK  (2.5V)
   Channel 11: 1.510 V - OK  (1.5V)
   Channel 12: 1.217 V - OK  (1.2V)
   Channel 13: 0.899 V - OK  (0.9V)
   Channel 14: 1.355 V - OK  (1.35V_DDR)
   Channel 15: 3.347 V - OK  (3.3V_STBY)

ALARM CONTACT 1
    Status:      not asserted
    Description: external alarm contact 1
    Severity:    minor
    Trigger:     closed

ALARM CONTACT 2
    Status:      not asserted
    Description: external alarm contact 2
    Severity:    minor
    Trigger:     closed

Driver Information:
--------------------
Status : RUNNING

 

 

---

 

Cisco Adaptive Security Appliance Software Version 9.8(2)17
Firepower Extensible Operating System Version 2.2(2.63)
Device Manager Version 7.9(1)

Compiled on Thu 04-Jan-18 10:21 PST by builders
System image file is "disk0:/asa982-17-lfbff-k8.SPA"
Config file at boot was "startup-config"

DBFirewall up 3 hours 11 mins
failover cluster up 19 days 1 hour

Hardware:   ASA5516, 8192 MB RAM, CPU Atom C2000 series 2416 MHz, 1 CPU (8 cores)
Internal ATA Compact Flash, 8000MB
BIOS Flash M25P64 @ 0xfed01000, 16384KB

0 Replies 0
Review Cisco Networking products for a $25 gift card