06-28-2016 09:41 AM - edited 03-12-2019 12:57 AM
Hello Expert,
I am confused in configuring my setup with ASA 5585 ( version 9.4 (2) 11) in Routed Mode.
Please see attached network diagram with details :
1. Cisco 3560 L3 Switch with 3 different subnet ip on 3 different ports:
216.218.185.65 /27
64.62.153.225/27
75.52.80.129/27
2. First Cisco 2960 L2 switch0 with one VLAN (Vlan 1) and all three Cisco 2960 ports (connected to 3560) added in Vlan1.
3. Second Cisco 2960 L2 switch1 = Need to be Configured
4. ASA 5585 Firewall = Need to be configured
5. Nexus N5000 Switch where three windows servers connected whose ip addresses is : = Need to be configured if required
Server1= 216.218.185.77/27 Gateway = 216.218.185.65
Server2 = 64.62.153.239/27 Gateway = 64.62.153.225
Server3 = 75.52.80.146/27 Gateway = 75.52.80.129
My task is, above three windows server ip address's should be ping from Cisco 3560 L3 Switch ?
Overall ping should be bidirectional that's it.
Please send me configuration of this setup asap. Very Urgent
KS
06-28-2016 06:03 PM
Hi,
If this network scenerio is not possible in route mode then not a problem , you can give me solution over transparent mode.
06-28-2016 11:42 PM
Nobody here to solve my small problem....
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: