06-24-2019 02:49 AM
Hello,
I was able to copy the ASDM image to the device but NOT the firmware image. It worked for many other customer devices that are supported by my company.
I can not copy it via ASDM or SSH. The process is running as normal until the end and it stops with an error.
ASA: 5512
Running-Firmware: 9.8(2)35
ASDM: 7.8(2)
I want to copy asa992-52-lfbff-k8.SPA.
I have read a post where you consider upgrading to a newer ASA-firmware first. Is this the case here?
Is there any other way to copy the file to the device?
Best regards,
Benjamin Körnig
Solved! Go to Solution.
06-24-2019 02:54 AM
i guess i found the solution.
the 5512 does not support this firmware.
06-24-2019 02:54 AM
i guess i found the solution.
the 5512 does not support this firmware.
06-24-2019 06:29 AM
The "lbff" in the image name indicates it is digitally signed. These image types are specific to ASA 5506-X, 5508-X and 5516-X appliances.
To run that version on an 5512-X you would would need the non-signed version of the same release. The file name is "asa-992-52-smp-k8.bin", available here:
https://software.cisco.com/download/home/284143092/type/280775065/release/9.9.2%20Interim
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: