ASA Cluster 5585 deploying the Master System config to another HW cluster group for DR
We have two Data Centers, East and West. The West is considered our DR site (separate, but identical Hw). If the EDC data center craters, we would like to spin up the WDC using the EDC's Master System config.
Currently we are using a tool to pull the System config by running 'copy run disk0:/MasterSystem.cfg. Below is the Context for ITAM, from a 'sh run' vs a 'copy run disk0:/..' Is there a issue with the 'mac-address auto' lines when using this config on a separate Hw Cluster at the WDC, or should we only use the 'sh run' config (and thus no 'mac-address' statements).
Below, is a portion of the Systems config showing only the context definition
Hi experts,I would like any suggestions on this topology. We are is the middle of replacing our old ASA5520 with the new FirePower. Our current firewall terminate our IPsec tunnels and the GRE is terminated on the first inside router's loopback on the sec...
Hi All, A customer wants to authenticate Anyconnect VPN users from an ASA using the client installed certificate and then with AD. i.e. Is this a corporate device?Would we recommend authenticating the cert on the ASA then passing the AD check to ISE ...
Hello Team, we are getting alert in FMC stating policy deployment failed, we are running on 6.2.0 version and not sure which version is stable version to re mediate this issue, in one event i have seen restart will resolve this issue but is it perman...
Threat Hunting 101
In the latest Cisco Cybersecurity report, we explore all there is to know about threat hunting and provide a how-to guide for creating a threat hunting team.
Here are some of th...
What Is Cisco Identity Services Engine?
Cisco Identity Services Engine (ISE) is an all-in-one enterprise policy control product that enables comprehensive secure wired, wireless, and Virtual Private Networking (VPN) access.
Cisco ISE offers...