09-23-2015 11:54 AM - edited 03-11-2019 11:38 PM
I have Customer with ASA 9.2(4) & CX 9.2(1)4.
I wanted to upgrade to CX 9.3(4.1).
CX is managed by On box Prism/Single Device Mode.
After reading document , I am confused .
Two Questions:
1 Do I need to upgrade PRSM first & than CX. ( I know this is the case with Multiple device Mode)
2 When I am trying to download the image, I see CX Boot image & pkg . Upgrading just require *.pkg . When you upgrade using *.pkg does it automatically update the Boot image.
Sincerely
Viral Patel
Solved! Go to Solution.
09-23-2015 06:43 PM
Hi Viral,
When using on-box PRSM, the PRSM and CX code is integrated - so no separate process.
The pkg upgrade file won't automatically install a new boot image.
But that's OK since the boot image is only required during initial imaging of the CX module.
09-23-2015 06:43 PM
Hi Viral,
When using on-box PRSM, the PRSM and CX code is integrated - so no separate process.
The pkg upgrade file won't automatically install a new boot image.
But that's OK since the boot image is only required during initial imaging of the CX module.
09-24-2015 06:08 AM
Thanks Marvin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide