Hi, I'm running ASA version 8.4(4)1 and have configured internet failover through the use of weighted default routes and tracking. This part works fine, but when I failover to ISP2 I can't connect out. The problem seems to be NAT, because when I failover it looks like the NAT entry for ISP1 is still being used. I have a second NAT entry for ISP2, is there anyway I can get the ASA to use the second NAT entry when it fails over to ISP2?
There are lots of examples out there on how to configure this, but all for older versions of ASA.
Hi All, A customer wants to authenticate Anyconnect VPN users from an ASA using the client installed certificate and then with AD. i.e. Is this a corporate device?Would we recommend authenticating the cert on the ASA then passing the AD check to ISE ...
Hello Team, we are getting alert in FMC stating policy deployment failed, we are running on 6.2.0 version and not sure which version is stable version to re mediate this issue, in one event i have seen restart will resolve this issue but is it perman...
Threat Hunting 101
In the latest Cisco Cybersecurity report, we explore all there is to know about threat hunting and provide a how-to guide for creating a threat hunting team.
Here are some of th...
What Is Cisco Identity Services Engine?
Cisco Identity Services Engine (ISE) is an all-in-one enterprise policy control product that enables comprehensive secure wired, wireless, and Virtual Private Networking (VPN) access.
Cisco ISE offers...
To participate in this event, please use the button to ask your questions
(This event was formerly know as Ask the Expert event)
This topic is a chance to discuss more about the best configuration and troubleshooting pr...