10-17-2018 09:47 AM - edited 02-21-2020 08:22 AM
I am looking for assistance to complete configuration migration for my ASA 5510 to 5516X.
What is the matching 9.X for this NAT
global (outside) 1 interface
global (dmz) 1 interface
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 10.55.88.0 255.255.255.0
nat (inside) 1 172.30.0.0 255.255.0.0
nat (inside) 1 0.0.0.0 0.0.0.0
nat (dmz) 0 access-list dmz_nat0_outbound
nat (hotel) 0 access-list hotel_nat0_outbound
********
Also do i have to define asdm image disk0:/asdm-XXXXX on the 5516X box does it come pre-loaded?
10-17-2018 09:51 AM
Try this conversion tool:
https://www.tunnelsup.com/nat-converter/
I believe the ASA's come with a default ASDM image on the flash. You may want to add the latest ASDM image to the flash and change the "asdm image" command to reflect the new image.
10-17-2018 09:57 AM
I tried that and i get some ACl errors below.. so wasn't sure what is getting missed
! Original statement: nat (inside) 0 access-list inside_outbound_nat0_acl
! Error: Matching ACL not found, please include it in the input.
! Original statement: nat (dmz) 0 access-list dmz_nat0_outbound
! Error: Matching ACL not found, please include it in the input.
! Original statement: nat (hotel) 0 access-list hotel_nat0_outboun
! Error: Matching ACL not found, please include it in the input.
10-17-2018 01:03 PM
Add both NAT and ACL lines from your 5510 into the tool. Your NAT statements have some ACL references in them.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: