12-03-2015 09:07 PM - edited 03-11-2019 11:59 PM
To my knowledge ASA firewall can be shutdown by unplugging the firewall cable, but when SFR runs on SSD hard disk, can I do that? Will it require graceful shutdown?
Solved! Go to Solution.
12-03-2015 09:12 PM
Hi,
You do have a shutdown command for the sfr hw and sw module shut down.
Please refer "shut down the module" section in below document
http://www.cisco.com/c/en/us/td/docs/security/asa/asa93/configuration/firewall/asa-firewall-cli/modules-sfr.html#pgfId-1486644
Thanks,
Shivapramod M
Please remember to select a correct answer and rate helpful posts
12-03-2015 09:12 PM
Hi,
You do have a shutdown command for the sfr hw and sw module shut down.
Please refer "shut down the module" section in below document
http://www.cisco.com/c/en/us/td/docs/security/asa/asa93/configuration/firewall/asa-firewall-cli/modules-sfr.html#pgfId-1486644
Thanks,
Shivapramod M
Please remember to select a correct answer and rate helpful posts
12-08-2015 11:11 AM
Thank you, how can I power on the SFR without restarting ASA?
Example: I will shutdown the SFR and after sometime I would like to turn on the SFR. How can I do that?
09-02-2019 08:41 PM
09-02-2019 09:05 PM
The sfr module is a software module on all ASA models (except the 5585-X). You can initialize it independently of the ASA in which it resides. See the command reference for the various relevant commands (sw-module module sfr reload, reset, shutdown etc.)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide