11-05-2017 07:08 AM - edited 02-21-2020 06:38 AM
I am quite green with ASA5506 and have a question(s). I am setting up a 5506 to replace our 5505 and have questions with regards to the NAT settings. I have setup two bridge ports configured each with 3 interface ports. I thought I would have setup a NAT rule for the bridge port but it appears I need to configure the rule for the interface. Is that correct? It also appears I need to configure SSH/ASDM access by interface not by bridge ports.
I feel like I'm missing something, any advice would be appreciated.
Solved! Go to Solution.
11-05-2017 10:46 AM
Your observation is right. I don't know why Cisco implemented it that way, but you need a nat-, ssh-, http- (and so on) command per interface. That's also documented in the configuration guide.
11-05-2017 10:46 AM
Your observation is right. I don't know why Cisco implemented it that way, but you need a nat-, ssh-, http- (and so on) command per interface. That's also documented in the configuration guide.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide