ASA5506-X Certification and asdm

[Roza12]

Hi everyone

this the first time for me to configure ASA5506-X in cli and

i want to configure EZVPN client mode in this device 

i have 2 questions: 

1- when i did (sh running configuration & sh crypto ca certificates )why  i couldn't find any certification ????

2- asdm is not working although the image is already exist  ????

and i did configure interface GigabitEthernet1/1
nameif outside
security-level 0
ip address dhcp setroute
!
interface GigabitEthernet1/2
nameif inside
security-level 100
ip address 192.168.1.100  255.255.255.0

[Abheesh Kumar]

Hi
give your ASA's Inside interface next hop IP that should be in the range of 192.168.1.x

route inside 172.16.20.7 255.255.255.255 192.168.1.x

HTH
Abheesh

[Roza12]

Thanks for your reply but i don't want to do that because it's customer device 

i should only access to device and configure it then deliver it to customer and i want to do that via asdm

because it's easer to configure EZVPN in GUI

[Abheesh Kumar]

To access the device via https, either you need to be from the inside interface or you need to configure the management interface.
If you would like to access asdm then you need to add the route and access it

HTH
Abheesh