ASA5510 two Interfaces are 1Gb, other interfaces 10/100?

[rizwanr74]

Hi Guys,

I ran into discover that ASA5510 that we are using for guest wifi access has only two interfaces are capable of 1Gb and interface Ethernet0/2 and Ethernet0/3 are 10/100 only.

Is there anyway that can be change with IOS upgrade on ASA5510 to enable Ethernet0/2 and Ethernet0/3 to be 1Gb as well?

I had connected port Ethernet0/2 to 7K by creating sub-interface, it shows no error on physcial interface Ethernet0/2 on Solarwinds monitoring but I see tons of error on sub-interface Ethernet0/2.100.

Anyone has any thoughts on how to resolve this sub-interface errors?

thanks

[Maykol Rojas]

Hello; 

What kind of errors are you seeing? No, there is no way to change 0/2 and 0/3 to be one Gig. 

Mike. 

[rizwanr74]

Hi Maykol,

Thanks for your reply.

The amount of discard is what most concern me, please see the attached Solarwinds monitoring image.

[Maykol Rojas]

Hello; 

How fast are they incrementing?

Mike.

[rizwanr74]

about 4 thousands discard for an hour.