cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3087
Views
0
Helpful
8
Replies

ASDM not working with ASA 8.4

central_bank
Level 1
Level 1

                   hi

I have recently upgraded ASA to 8.4 and found that ASDM is not working on it. I tried the latest ASDM version 7.1 still no luck.

When I try to access ASA using IE...it just shows " Page can not be displayed "

Following is the config which I have

http server enable

http 0.0.0.0 0.0.0.0 inside

http 10.52.193.218 255.255.255.255 inside

asdm image disk0:/asdm-711-52.bin

asdm location 0.0.0.0 0.0.0.0 inside

asdm history enable

Is there anything else required in ASA 8.4 for ASDM to work?

When I telnet to ASA interface with 443 port it works

8 Replies 8

My Self
Level 1
Level 1

I have noticed the same problem ...

Andrew Phirsov
Level 7
Level 7

Probably the java (wich is used by asdm) installed on your management PC doesn't suppport legacy versions of SSL and weak cryptography (like DES) for communicating with ASA. Maybe ssl-encryption in your config is set to des? If so, then change it to smth more appropriate (3des, aes).

No, that seem not causing the problem, I have got more ASAs to manage. I got 2 new delivered who caused the mentioned problem.  I looked for more causes but no solution.

If you already have ADSM-IDM launcher installed on your system then try to open with that.

of course

My new ASA is a ASA5545-X

I installed different means a older ASA Version and I tried several ASDM Versions. Nothing happens, the ASDM isnot working, even with the factory default on Management Interface it will not work.

I checked it with https://supportforums.cisco.com/docs/DOC-15016 and find out that following was missing:

ssl encryption rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1

After that it runs.

Isn't it exactly what i said before?

lol, yes Andrew we missed your point... ;-)

Andrew, Yes, but I except from Cisco thank they may be able to deliver an simple running config that work on there boxes. If i have to find out first by cli why something isnot working. Therefore a :-( for Cisco and a .-) for Andrew

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card