Bandwidth reservation for VC traffic in ASA 5505

[mahadeer md ismail]

Hi All,

We have 10MB dedicated Internet BW and want to run VC device and due to heavy traffic and BW high utilization at peak hours, VC performance is not sufficient.

We would like to reserve 2MB for VC device.  Please let me know how much possible to fix up this configuration in ASA5505 version disk0:/asa724-k8.bin

I've gone through below link and got the solution as policing

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml

Please share the extract configuration step for the above .

Thanks in advance.

[Julio Carvajal · Accepted solution]

Hello,

Exactly, I think policing will do it for you,

You will need to use the MPF classification:

1) Match the traffic with an ACL

2) Create a class-map and match it with the ACL

3) Use the global policy mal (created by default) add it the Class-map and add the police action specified the amount of bandwith provided to that particular traffic,

Regards

[mahadeer md ismail]

Hi,

Thanks for your update.

Could you plz share the extract configuration for the same.

My requirement is

Out of 10 MB internet only 2 MB i want to use Veido Conference (VC) traffic.

Thanks in Advance.

[Julio Carvajal · Accepted solution]

Helllo Mahadeer,

In that link I post is the configuration,

You could try to configure it, post what you have done and then I can make the requested changes,

but no need to do it right now as the config is in the link

Regards

[mahadeer md ismail]

Ok,

thanks for your update.

Regards,

[Julio Carvajal]

Hello,

Hey, my pleasure,

If you have any questions just let me know

Julio

[Peter Long]

Dead Link :(