09-14-2012 10:40 AM - edited 03-11-2019 04:54 PM
hello team.
I must mount 2 (two) different ASA clusters (each cluster having 2 x ASA5585 firewalls, and serving different purposes) on a customer site.
But the customer wants both clusters (in other words, the 4 firewalls) to share a common subnet for management purposes. ¿ is this a supported setup? The image below depicts the idea.
Your kind answers will be greatly appreciated
Rogelio Alvez
Argentina
Solved! Go to Solution.
09-14-2012 06:32 PM
The configuration guide is silent on specifically calling out what you describe as supported but it's a leading recommended practice to segregate and collect your various management interfaces on a separate network segment. There's no reason it wouldn't work just fine for device management.
09-14-2012 06:32 PM
The configuration guide is silent on specifically calling out what you describe as supported but it's a leading recommended practice to segregate and collect your various management interfaces on a separate network segment. There's no reason it wouldn't work just fine for device management.
09-17-2012 01:08 PM
Thanks a lot Marvin, and sorry for the late answer to you.
I imagined that this setup was correct, but I wanted to double check with you guys.
Best regards, Rogelio
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide