02-19-2014 06:41 AM - edited 03-11-2019 08:47 PM
Hi all,
I’m having a problem to save Cisco ASA configuration in GNS3 via write memory command.
ciscoasa(config)# wr mem
Building configuration…
Cryptochecksum: c066a7ab b5b9071e bb5ee1f6 2d93be53
%Error copying system:/running-config (Not enough space on device)
Error executing command
[FAILED]
ciscoasa(config)#
Here are the details of the lab setup.
PC DETAILS:
Windows 7 Enterprise SP1 64bit
GNS3 v0.8.6 all-in-one (installer for 32-bit and 64-bit which includes Dynamips, Qemu/Pemu, Putty, VPCS, WinPCAP and Wireshark)
ASA DETAILS:
13,279,888 asa802-k8.bin.unpacked.initrd
1,095,856 asa802-k8.bin.unpacked.vmlinuz
Please advise. Thanks in advance.
08-20-2014 04:20 AM
change the interface type from e1000 to pcnet
08-21-2014 10:03 AM
Tried that it's not working for me :(
PL
02-06-2015 07:11 AM
instead of this:
To create a flash file
cd "C:\Program Files\GNS3\qemu-2.1.0"
qemu-img.exe create c:\FLASH 256M
try this:
To create a flash file
cd "C:\Program Files\GNS3\qemu-2.1.0"
qemu-img.exe create c:\User\usuario\GNS3\FLASH 256M
Let me know if is helpfull.
04-19-2015 01:35 AM
http://7200emu.hacki.at/viewtopic.php?p=34550&sid=400d9ebdbbb4e7eceedc345903dd0faa
Try formatting the disk0 partition and reloading:
format disk0:
reload
That worked for me
03-20-2016 04:20 AM
this worked for me too!
thx
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: