08-30-2012 11:49 AM - edited 03-11-2019 04:48 PM
I have been looking to see if under the new code versions we can do multiple definitions of the NAT like to old multiple global statements.
Old method
nat (inside) 1 10.1.0.0 255.255.255.0
global (outside) 1 192.168.1.3
global (dmz) 1 172.16.4.4
will this work under the new code
object-network net-10.1.0.0
subnet 10.1.0.0 255.255.255.0
nat(inside,outside) dynamic 192.168.1.3
nat(inside,dmz) dynamic 172.16.4.4
instead of having to do a separate object definition for the same network with different nat statement.
Thank you for your assistance.
Rich
Solved! Go to Solution.
08-30-2012 12:06 PM
Hello Rich,
This is not possible because the second nat statement will overwrite the first one.
You need two different object names
object-network net-10.1.0.0
subnet 10.1.0.0 255.255.255.0
nat(inside,outside) dynamic 192.168.1.3
object-network net-10.1.0.0-2
subnet 10.1.0.0 255.255.255.0
nat(inside,dmz) dynamic 172.16.4.4
Regards,
Felipe
08-30-2012 12:06 PM
Hello Rich,
This is not possible because the second nat statement will overwrite the first one.
You need two different object names
object-network net-10.1.0.0
subnet 10.1.0.0 255.255.255.0
nat(inside,outside) dynamic 192.168.1.3
object-network net-10.1.0.0-2
subnet 10.1.0.0 255.255.255.0
nat(inside,dmz) dynamic 172.16.4.4
Regards,
Felipe
08-30-2012 12:08 PM
Thank You for the quick response. Thought it might have been something like that but wanted to get confirmation.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide