cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
700
Views
0
Helpful
0
Replies

Cisco asa 5505 unable open rommon

lezgin000
Level 1
Level 1

hello, I have asa 5505. 

it has a bug, when you first power on, it writes 


CISCO SYSTEMS
Embedded BIOS Version 1.0(12)13 08/28/08 15:50:37.45

Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9

Evaluating BIOS Options ...
Invalid Key: 001B

Invalid Key: 001B

Invalid Key: 001B

Invalid Key: 001B

Invalid Key: 001B

Invalid Key: 001B

Invalid Key: 001B

Invalid Key: 001B

Launch BIOS Extension to setup ROMMON

Cisco Systems ROMMON Version (1.0(12)13) #0: Thu Aug 28 15:5 5:27 PDT 2008

 

I cannot open rommon directly.it gives me an error.

after a long time asa wants to open flash and boot image. then again it takes an error.

 

i2c_read_word_w_wait() error, slot = 0x0, device = 0x64, address = 134 byte count = 2. Reason: I2C_HOST_BUSY_ERROR

 after some times Asa boots Rommon. but i cant open my slash.it gives me 

Disk0: is not present.

...........................

i try to past here all conf from the asa.

 

CISCO SYSTEMS
Embedded BIOS Version 1.0(12)13 08/28/08 15:50:37.45

Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9

Evaluating BIOS Options ...
Invalid Key: 001B

Invalid Key: 001B

Invalid Key: 001B

Invalid Key: 001B

Invalid Key: 001B

Invalid Key: 001B

Invalid Key: 001B

Launch BIOS Extension to setup ROMMON

Cisco Systems ROMMON Version (1.0(12)13) #0: Thu Aug 28 15:55:27 PDT 2008
i2c_read_word_w_wait() error, slot = 0x0, device = 0x64, address = 134 byte count = 2. Reason: I2C_HOST_BUSY_ERROR

Platform ASA5505

Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Boot interrupted.

Ethernet0/0
i2c_write_byte_w_wait() error, slot = 0x0, device = 0x64, address = 128 byte count = 1. Reason: I2C_HOST_BUSY_ERROR
esw_reg_read: i2c_write_byte_w_wait(0) returned 0x5
Ethernet port 0 could not be initialized.


Default Interface number-0 Not Up


Use ? for help.
rommon #0>
rommon #0>
rommon #0>
rommon #0>
rommon #0> erase disk0:

About to erase the selected device, this will erase
all files including configuration, and images.
Continue with erase? y/n [n]: y

Disk0: is not present.

0 Replies 0
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: