cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to Cisco Firewalls Community


290
Views
0
Helpful
5
Replies
Beginner

Cisco ASA 5510 Regular static Nat is not working

We have Cisco ASA 5510 Firewall

Having 4 public ips in which 3 are working without any issues.

The 4th public ip previously working but suddenly it stoped.

it will work only if i connect the cable to LAN and Manually assign the Public IP.

 

My ASA Regular Static Nat configuration:

access-list 101 extended permit ip any host X.X.X.X
static (inside,outside) X.X.X.X 10.10.3.7 netmask 255.255.255.255

5 REPLIES 5
Beginner

Hi,If configuration as same

Hi,

If configuration as same as ealier when every thing was working fine and no other configuration changes are made on firewall during that time period, thats mean to issue with configuration. Just do reconfigure specific part of configuration that you mentioned above, I hope it will work.

 

Don't forget to rate helpfull posts.

Sajid Ali Pathan

Beginner

The other public ips are

The other public ips are working with the same configuration.

But only one ip having issues

Highlighted
Beginner

Hi,I got you reply on email

Hi,

I got you reply on email but not on support forum, I don’t know what bug is this with cisco community. Leave it, come to the point:

I understand you next question, you have to do as i said, Just reconfigure static net for problematic IP.

 

Don't forget to rate helpfull posts.

Sajid Ali Pathan

Beginner

yes i tried so many times but

yes i tried so many times but still nothing.

 

 

Beginner

do i need to remove all the

do i need to remove all the access-list configuration?

i means remove all and reconfig it again .. Will work?

 

Please reply