09-03-2013 03:29 PM - edited 03-11-2019 07:33 PM
I have two subnets one on interface 3 and one on interface 2. interfaces 3 was the first one setup with a default route. Interface 2 was just added with the new subnet and I can recieve traffic to the 10.7.5.1 server but it appears that the traffic won't get back out to the internet. Any help would be much appreciated.
Solved! Go to Solution.
09-03-2013 11:17 PM
You need a static default-route pointing to the sedond isp-router with a high admnistrative distance:
route (outside2) 0.0.0.0 0.0.0.0 75.XXX.XXX.61 100
Sent from Cisco Technical Support iPad App
09-03-2013 04:23 PM
Post your configuration so we can see how you are set up.
Sent from Cisco Technical Support Android App
09-03-2013 04:45 PM
09-03-2013 04:46 PM
the server in question is G-O-L-F and i'm trying to get it to route out 75.XXX.XXX.61. When i hit the web address I can see on the server the connection is making it there but the web page never loads. So i'm assuming that it wont route back out the outside2 interface like it's supposed to.
09-03-2013 11:17 PM
You need a static default-route pointing to the sedond isp-router with a high admnistrative distance:
route (outside2) 0.0.0.0 0.0.0.0 75.XXX.XXX.61 100
Sent from Cisco Technical Support iPad App
09-04-2013 09:25 AM
thanks I was entering the rout wrong so the ASA wouldn't take the config.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide