cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
722
Views
5
Helpful
1
Replies

Cisco ASA 5585-X upgradation

Hi,

We have a schedule ASA (HA) 5585-X up-gradation scheduled for next week end. Current ASA version is 9.1(6)10, & we are planing to upgrade to 9.8(4) 10 version.

Please let me know, if i can directly upgrade to 9.8(4)10 version from current 9.1(6)10, & if yes will there is any impact on HA during the up-gradation.Also please let me know, if there is any critical points to be considered/checked before upgrade, as ASA firewall is the core firewall & is very very critical.

Also i am planing to configure console authentication as local database instead of ISE during upgrade window. Please let me know, if both commands need for Console to point to local database.

ASA # aaa authentication enable console  LOCAL

ASA # aaa authentication serial console LOCAL

 

1 Reply 1

you should be fine going to 9.1(6) to 9.8 here is the link here

asa.PNG

 

 

and here is the cisco configuration guide to upgrade the ASA in HA pair here

!

username admin password cisco privilege 15

aaa authentication serial console LOCAL

aaa authentication enable console LOCAL

!

please do not forget to rate.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card