cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
724
Views
5
Helpful
1
Replies

Cisco ASA 5585-X upgradation

Hi,

We have a schedule ASA (HA) 5585-X up-gradation scheduled for next week end. Current ASA version is 9.1(6)10, & we are planing to upgrade to 9.8(4) 10 version.

Please let me know, if i can directly upgrade to 9.8(4)10 version from current 9.1(6)10, & if yes will there is any impact on HA during the up-gradation.Also please let me know, if there is any critical points to be considered/checked before upgrade, as ASA firewall is the core firewall & is very very critical.

Also i am planing to configure console authentication as local database instead of ISE during upgrade window. Please let me know, if both commands need for Console to point to local database.

ASA # aaa authentication enable console  LOCAL

ASA # aaa authentication serial console LOCAL

 

1 Reply 1

you should be fine going to 9.1(6) to 9.8 here is the link here

asa.PNG

 

 

and here is the cisco configuration guide to upgrade the ASA in HA pair here

!

username admin password cisco privilege 15

aaa authentication serial console LOCAL

aaa authentication enable console LOCAL

!

please do not forget to rate.
Review Cisco Networking products for a $25 gift card