Hi Folks, I recently had a power outage at my office and after the power was restored, my ASA 5506 has gone on the fritz.
I am able to console and get to ROMMON, I see the output below but I have no idea how to decipher this, would appreciate any help:
Located '.boot_string' @ cluster 892706.
#
Attempt autoboot: "boot disk0:"
Located 'asa932-2-lfbff-k8.SPA' @ cluster 11.
#########################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################
LFBFF signature verified.
ÿStarting udev
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
There are differences between boot sector and its backup.
Differences: (offset:original/backup)
65:01/00
Not automatically fixing this.
Starting check/repair pass.
Starting verification pass.
/dev/sdb1: 118 files, 859239/1916522 clusters
dosfsck(/dev/sdb1) returned 0
Processor memory 1478156369
Compiled on Wed 28-Jan-15 15:25 PST by builders
Panic: Init Thread - pci_platform_probe_kenton: Missing data ports
(set_exptime) Timer not a leaf 0x00000000038052b0. Traceback: 0x00000000004490fe 0x0000000000440b89 0x000000000044f9fa 0x000000000044ab6e 0x000000000170e8ca 0x0000003bbdc10190 0x00000000004436fc 0x000000000237eeee 0x00000000017049f9 0x00000000004419ea 0x00000000017124d1 0x0000000000423f12 0x0000003bbd821de5
mgd_timer_set_exptime: Not a leaf called from 0x000000000044f9fa
core0 same core snap_count=1 signo=11 RIP=44fa30
-----------------------------------------------
Traceback output aborted.
Flushing first exception frame:
r8 0x0000000000008802
r9 0x000000000000002f
r10 0x00007fffffffe2e0
r11 0x0000000000003206
r12 0x0000000000000000
r13 0x0000000000000003
r14 0x0000000000000002
r15 0x0000000000000000
rdi 0x00000000000005b0
rsi 0x0000000000000006
rbp 0x00007fffffffe550
rbx 0x000000000306a51c
rdx 0x00000000000005b0
rax 0x0000000000000000
rcx 0xffffffffffffffff
rsp 0x00007fffffffe518
rip 0x0000003bbd8358e7
eflags 0x0000000000003206
csgsfs 0x0000000000000033
error code n/a
vector 0x0000000000000000
old mask 0xfffffffe3e3a7207
cr2 0x0000000000000000
Nested traceback attempted via signal, from:
Page fault: Address not mapped
r8 0x0000000000008802
r9 0x0000000000000042
r10 0x00007fffffffda81
r11 0x0000000000003293
r12 0x0000000000000001
r13 0x00000000066fa1e0
r14 0x0000000000000000
r15 0x00000000066fa1e0
rdi 0x0000000000000000
rsi 0x0000000000000004
rbp 0x00007fffffffdce0
rbx 0x00000000038050a0
rdx 0x0000000000000000
rax 0x0000000000000000
rcx 0x0000000000000000
rsp 0x00007fffffffdcd0
rip 0x000000000044fa30
eflags 0x0000000000013246
csgsfs 0x0000000000000033
error code 0x0000000000000006
vector 0x000000000000000e
old mask 0xfffffffe3e3a7207
cr2 0x0000000000000008
Cisco Adaptive Security Appliance Software Version 9.3(2)2
Compiled on Wed 28-Jan-15 15:25 PST by builders
Hardware: ASA5506
Crashinfo collected on 21:10:07.000 UTC Sat Jan 12 2019
Traceback:
0: 0x00000000004093c7
1: 0x0000000000449ca8
2: 0x000000000170e691
3: 0x0000003bbdc10190
4: 0x000000000044ab6e
5: 0x000000000170e8ca
6: 0x0000003bbdc10190
7: 0x00000000004436fc
8: 0x000000000237eeee
9: 0x00000000017049f9
10: 0x00000000004419ea
11: 0x00000000017124d1
12: 0x0000000000423f12
13: 0x0000003bbd821de5
-----------------------------------------------
Process shutdown finished
Rebooting.....
Rom image verified correctly
Cisco Systems ROMMON, Version 1.1.01, RELEASE SOFTWARE
Copyright (c) 1994-2014 by Cisco Systems, Inc.
Compiled Mon 10/20/2014 15:59:12.05 by builder
Current image running: Boot ROM0
Last reset cause: PowerCycleRequest
DIMM Slot 0 : Present
Platform ASA5506 with 4096 Mbytes of main memory
MAC Address: a4:6c:2a:aa:1c:fb
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately. |
