Cisco ASA5506-X cannot manage firepower on box

[jakkrit01]

I have recently configured a 5506 with a firepower module  but I can't use firepower module via ASDM plase halp me.

ciscoasa# show version

Cisco Adaptive Security Appliance Software Version 9.5(2)
Device Manager Version 7.5(2)

---------------------------------------------------------------------------------------------

ciscoasa# sh running-config

:
ASA Version 9.5(2)
!
hostname ciscoasa
enable password 2KFQnbNIdI.2KYOU encrypted
names
!
interface GigabitEthernet1/1
nameif outside
security-level 0
no ip address
!
interface GigabitEthernet1/2
nameif inside
security-level 100
no ip address
!
interface GigabitEthernet1/3
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/4
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/5
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/6
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/7
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/8
shutdown
no nameif
no security-level
no ip address
!
interface Management1/1
management-only
nameif management1
security-level 0
ip address 192.168.1.254 255.255.255.0

---------------------------------------------------------------------------------------------

ciscoasa# show module sfr details
Getting details from the Service Module, please wait...

Card Type: FirePOWER Services Software Module
Model: ASA5506
Hardware version: N/A
Serial Number: JAD1948012F
Firmware version: N/A
Software version: 6.0.0-1005
MAC Address Range: cc46.d6af.df2b to cc46.d6af.df2b
App. name: ASA FirePOWER
App. Status: Up
App. Status Desc: Normal Operation
App. version: 6.0.0-1005
Data Plane Status: Up
Console session: Ready
Status: Up
DC addr: No DC Configured
Mgmt IP addr: 192.168.1.253
Mgmt Network mask: 255.255.255.0
Mgmt Gateway: 192.168.1.254
Mgmt web ports: 443
Mgmt TLS enabled: true

---------------------------------------------------------------------------------------------

----------------------------ON_FirePOWER------------------------------------------

> show interfaces
--------------------[ outside ]---------------------
Physical Interface : GigabitEthernet1/1
Type : ASA
Security Zone : None
Status : Enabled
Load Balancing Mode : N/A
---------------------[ inside ]---------------------
Physical Interface : GigabitEthernet1/2
Type : ASA
Security Zone : None
Status : Enabled
Load Balancing Mode : N/A
---------------------[ cplane ]---------------------
IPv4 Address : 127.0.2.1
----------------------[ eth0 ]----------------------
Physical Interface : eth0
Type : Management
Status : Enabled
MDI/MDIX : Auto
MTU : 1500
MAC Address : CC:46:D6:AF:DF:2B
IPv4 Address : 192.168.1.253
----------------------[ tun1 ]----------------------
IPv6 Address : fdcc::bd:0:ffff:a9fe:1/64
---------------------[ tunl0 ]----------------------
----------------------------------------------------

[ispatel · Accepted solution]

HI,

Within ASDM:

Configuration > Device Management > Users/AAA > User Accounts

Please make sure your user account has Privilege Level 15.

Log out and log back in after you have made these changes.

Alternatively, you may create an admin account with Privilege Level 15
and attempt access with it.

Thanks,
Ishan
Please remember to select a correct answer and rate helpful posts

[jakkrit01]

Thank for your answer now I can use firepower module.

Thank you so much.

[e2thura777@gmail.com]

Hi,

I have my cisco asa 5506-x with ASA version 9.6.1 and ADSM 7.6.1. But i can't launch sfr in ADSM launcher. My sfr was already configure at last January 10.2018 with ip address and use Lan ip as gateway ip for it and it was work at this time. I see the sfr is up in ASA global configuration mode using this command "show module sfr detail". My Java verson is also latest JRE 8u-181 version. But i can't see FirePower Configuration tab in my ASDM launcher. I already use user name and password with Privilege level 15 also. My sfr version is sfr 5.4.1-211. Please kindly help to me.