cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
589
Views
0
Helpful
2
Replies

CSC-SSM error

chrisdims
Level 1
Level 1

Hi,

Although my CSC-SSM module is down, I am stille getting the following error:

%ASA-3-421001: TCP|UDP flow from interface_name:IP_address/port to 
interface_name:IP_address/port is dropped because application has failed.

A packet was dropped because the CSC SSM application failed. By default,        this message is rate limited to 1 message every 10 seconds.

The module details are:

Mod Card Type                                    Model              Serial No.

--- -------------------------------------------- ------------------ -----------

  1 ASA 5500 Series Content Security Services Mo ASA-SSM-CSC-10-K9  JAF13000FJK

Mod MAC Address Range                 Hw Version   Fw Version   Sw Version

--- --------------------------------- ------------ ------------ ---------------

  1 0023.ebc4.1cc9 to 0023.aaaa.bbbb  1.0          1.0(11)5

Mod SSM Application Name           Status           SSM Application Version

--- ------------------------------ ---------------- --------------------------

Mod Status             Data Plane Status     Compatibility

--- ------------------ --------------------- -------------

  1 Down               Not Applicable

Please advice.

Thank you,

Christos.

2 Replies 2

Dinkar Sharma
Cisco Employee
Cisco Employee

Hi Chris,

What is the action Defind in policy MAP for CSC?

hostname(config−pmap−c)#csc {fail−close | fail−open}

Regards,

Dinkar

Hi Dinkar,

Thank you for your reply.

The csc is allowed the traffic if failed (#csc fail-open).

Best Regards,

Chris.

Review Cisco Networking products for a $25 gift card